for further information contact your local stmicroelectronics sales office. may 2014 docid026405 rev 1 1/4 STEVAL-IPT007V1 smartcard interface evaluation board based on the st8034hc data brief features ? smartcard connector ? labeled test-points provide accessibility to all signals on the board ? design allows standalone operation for basic tests ? interface to mcu block and easy board configurability allows full-featured functionality for applications such as set-top box ? on-board 10 mhz crystal clock oscillator can be used to provide card clock in standalone operation ? card clock source selection switch allows a choice between the on-board crystal oscillator as card clock source, or an external clock source provided by microcontroller block through the mcu interface together with data signals ? card supply voltage selection provides simple but flexible card supply through either on-board configuration switches or remotely by microcontroller ? rohs compliant description the st8034xx interface devices are placed between the smartcard and the microcontroller to provide all necessary supply, protection, detection and control functions, while requiring a minimum of external components. the STEVAL-IPT007V1 product evaluation board allows easy demonstration and testing of the st8034hc 24-pin smartcard interface features. the board can also be used as a functional block for a complete application, as it is designed both for standalone operation or to be controlled by the microcontroller. the board is fully configurable to maintain flexibility for various use scenarios. it includes standard interfaces on both sides (smartcard connector, mcu interface connector) and easily accessed, labeled test-points on all signals. the STEVAL-IPT007V1 product evaluation board addresses market segments including pos, set- top boxes, pay tv, identification, banking and tachograph. www.st.com
schematic diagram STEVAL-IPT007V1 2/4 docid026405 rev 1 1 schematic diagram figure 1. STEVAL-IPT007V1 circuit schematic
docid026405 rev 1 3/4 STEVAL-IPT007V1 revision history 4 2 revision history table 1. document revision history date revision changes 23-may-2014 1 initial release.
STEVAL-IPT007V1 4/4 docid026405 rev 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com
|
